Consibio Support Team

Allows serial communication with various RS232 devices. Wiring

Allows serial communication with SDI-12 devices. Includes both a 5V and 12V supply output for sensors (max 75 mA).   Wiring

Sampling of two different analog 4-20mA signals. The expansion can work both as a passive (loop sourced externally) and active input (loop sourced by the expansion) with a simple change of sensor ...

  An expansion board for Consibio Logger v3, that enables the Logger to supply two separate variable analog outputs to external systems (such as PLCs) or for direct actuator control: 0-10V: Variab...

An expansion board for Consibio Logger v3, that enables sampling of NO (normally open), dry pulse signals from external relays, float switches, NPN pulse outputs from sensors or similar.  Installat...

Measures the barometric pressure internally in the Consibio Logger. Can be used for pressure compensation of absolute pressure measurments. Range: 0.3 to 1.25 barResolution: Better than 0.002 mbar...

Allows direct, low power sampling of a strain gauge for force and weight measurements. Wiring Plug the 4 wires of a load cell directly into the terminals of the expansion. The wiring shown under "...

Expansion board for direct connection of raw Pt100 probes for accurate temperature measurements without the need for external transmitters.   Wiring

Expansion board for direct connection of raw thermocouple probes for temperature measurements in more extreme conditions without the need for external transmitters.   Wiring

  An expansion board for Consibio Logger v3, that enables the Logger to control an external load with a built-in relay. The expansion board exists in two version: DC version: Can be used to switch...